Rubber Vibration Damping Pad M3 IFlight for F3/F4 Flight Controller (4pcs)
PRODUCT DESCRIPTION
In order to reduce the connection between the flight control and quadcopter frame, after a long test, this specifically designed damping pad which uses excellent ultra-soft while tough rubber material, easy to install. On the shock-absorbing effect can be significant. High-frequency vibrations transmitted to the vehicle abatement head off on that definition aerial damage rate is greatly reduced.
Length: 7mm rubber/ 4.5mm screw length
installation groove diameter: diameter of 5.8mm
Size: M2 / M3
Package included:
4pcs * Shock Absorption Damping Ball
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component follows market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you buy now, we ship within 24h from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What type of screws are compatible with these damping pads and what hole size do I need in the drone frame?
A: These damping pads are for M3 screws. You will need holes in your drone frame with a diameter of 5.8mm for a correct installation. The total length of the screw plus the pad is 7mm (pad) + 4.5mm (screw) = 11.5mm, so make sure there is enough room in the component stack.
Q: What is the main advantage of using these damping pads compared with other mounting methods for the flight controller?
A: The main advantage is the significant reduction of high-frequency vibrations transmitted to the flight controller. This lowers the chance of sensor errors (gyroscope, accelerometer) and therefore improves flight stability and reduces the drone's failure rate, especially in aggressive flying or with a lot of movement.
Q: Are these pads compatible with all F3 and F4 flight controllers? Are there any special considerations when installing them?
A: These pads are designed for F3 and F4 flight controllers that use M3 mounting holes. However, final compatibility depends on the mounting hole layout of your specific flight controller. When installing them, make sure the pads are properly seated in the frame holes and that the screws are moderately tightened to avoid damaging the pads or the flight controller.
Reviews
There are no reviews yet