📋 Technical Specifications
| Flight time | |
| General BNF Guide | so that your start is as easy as possible! |
ProTek25 Pusher HD w/ Caddx Polar Vista iFlight
After our great success with the serie iFlight ProTek, we are pleased to announce a new member. The ProTek25 Pusher!
Designed for pilots looking for less weight but great durability, maximum performance but long range and flight time.
A lot of effort went into creating the best lightweight 2.5-inch pusher-style quad on the market.
This rig feels at home in both cinematic shots and light freestyle. Navigating the tightest spaces, chasing skateboards or simply having fun in your backyard. Our iFlight naked Hero8 TPU case kit should be the perfect complement for getting great shots from literally anywhere.
– Durable aerodynamic PP body and two-piece carbon frame construction
Only 8 screws to separate the main plastic body from the carbon frame, motors and electronics. Quick, easy and affordable to repair or customize!
– Inverted pusher-type design for greater thrust and efficiency
Propellers thrust can travel without any disturbance from the frame or wires; longer flight time, less noise and less prop wash!
– Powerful XING 1404 motors to carry your naked GoPro
Lightweight, efficient and maximum power for its size; more than enough thrust to fly unrestricted in cruising and acro!
– Weighs under 250g including 650mAh 4S battery and naked Hero8
This drone is in a sub-250g category that can be used without a license or registration in most countries!
Flight time:
Batteries used: iFlight Fullsend 4S
With naked GoPro: 650mAh 3-5min, 850mAh 4-6min
Without naked GoPro: 650mAh 5-7min, 850mAh 6-8min
Characteristics:
– Alto rendimiento SucceX-D 20A F4 Whoop AIO V3.2 to save weight and space
– Sistema Digital HD Caddx Polar Vista
– Smooth as butter 1404 4600KV (Enlace)
PRE-CONFIGURED AND READY TO FLY:
– Is this your first time using one of our BNFs? We have carefully prepared an article about General BNF Guide so that your start is as easy as possible!
– Don't worry about setup, we've already done it for you! A basic PID and Filter configuration has been applied for an excellent flying experience!
To restore lost settings or for updates, see our linked article on "Factory Firmware/Dumps"
– Angle mode (self-leveling mode) is enabled by default to make sure your first flight doesn't end in disaster!
See our linked article on "How to disable Angle mode, enable Acro mode"
– Having trouble binding your Frsky receiver? See <a href="https://iflightrc.freshdesk.com/support/solutions/articles/48000847297-how-do-i-bind-my-radio-Transmisor-«>"How to bind my Transmitter"
WE CARE ABOUT OUR CUSTOMERS:
Check our Freshdesk page for helpful articles and explanations.
If you have any problems, questions or suggestions, don't hesitate to contact our customer support team via our iFlight FRESHDESK TICKET SYSTEM
Open a ticket and provide all the necessary information so we can analyze and help you solve your problem.
Change log:
August 2021: XING 1404 5500KV changed to XING 1404 4600KV
ProTek25 Pusher BNF Specifications:
– Electronics: SucceX-D Whoop AIO V3.2 (SKU:S010673)
– Motor: XING 1404 4600KV (ENLACE)
– Distancia entre motores: 108mm
– Body size: 76.3*76.3mm
– Top plate thickness: 3mm
– Top and bottom plate spacing: 21mm (aluminum standoff height)
– Prop size: 2.5 inch
– FC pattern: 25.5*25.5mm / 20*20mm
– FPV camera spacing: 20mm
– Weight: 143.8g (without battery)
Components and parts included in the ProTek25 Pusher HD Quad BNF
Pre-built and tested quadcopter
– 1x Marco iFlight ProTek25 Pusher
– 1x Caddx Polar Vista Digital HD system kit
– 1x Antena iFlight Sigma ipex/UFL LHCP 5.8g
– 2x iFlight Nazgul 2525 prop (Set of 4 – Color may vary)
– 1x 15x150mm battery strap
– 1x 15x180mm battery strap
FC + ESC AIO // SucceX-D Whoop AIO V3.2 (SKU:S010673)
*Size: 41*41mm
*Mounting pattern: 25.5*25.5mm/φ3mm
*Conector: Micro-USB
*MCU: STM32F411
*Giroscopio: MPU6000
*OSD: IFLIGHT OSD (AT7456E)
*Blackbox: 16Mb Flash Onboard
*Salida BEC: 5V 2.5A
*Barometer: DPS310
*Corriente constante: 20A, 30A (Pico)
*Entrada: 2-6S
*Current sensor: yes
*BLHeli: BLHeli-S
*ESC telemetry: no
*Objetivo: IFLIGHT_F411_AIO
*Firmware ESC: G-H-30 BLS
Suggested additional parts
Importante
The DJI remote controller is recommended for beginners since you won't need to set up another receiver, but it is also optional on this BNF drone because it is NOT required to use the FPV system. If you choose not to use the DJI remote controller, you can pick a receiver option for your transmitter and then bind it to your own radio as usual.
- Nuestros Receptores Frsky come with the latest factory default ACCST 2.XX firmware. Make sure to use compatible transmitter firmware! When using multi-protocol receivers (Radiomaster, Jumper, etc) select the 2X or X2 radio protocol.
- See our article "How to bind my Transmitter" or contact www.frsky-rc.com for more details.
The battery holder is not included and must be purchased separately!
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component follows market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you buy now, we ship within 24h from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What type of battery is recommended to maximize flight time with the ProTek25 Pusher HD, and what is the flight-time difference between the 650mAh and 850mAh options with a naked GoPro?
A: iFlight Fullsend 4S batteries are recommended for the best performance. With a naked GoPro Hero8, a 650mAh battery gives 3 to 5 minutes of flight, while an 850mAh battery offers 4 to 6 minutes. The difference comes from the larger capacity of the 850mAh battery, which allows a longer flight.
Q: The ProTek25 Pusher HD uses a 'pusher' design. What are the advantages of this design in terms of performance and flying experience compared with a traditional design?
A: The 'pusher' (inverted) design places the props behind the drone's body. This offers several advantages: greater thrust and efficiency, since the airflow from the props is not disturbed by the frame or wires. This translates into longer flight time, less noise and reduced 'washed-out' behavior (loss of control due to prop turbulence), improving stability and maneuverability.
Q: What is the total weight of the ProTek25 Pusher HD drone with a 650mAh 4S battery and a naked Hero8, and why is it important that it weighs under 250g?
A: The total weight of the drone with a 650mAh 4S battery and a naked Hero8 is under 250g. This weight is crucial because in most countries drones weighing less than 250g do not require a license or registration to operate, significantly simplifying the process of getting started and avoiding possible legal complications.
Reviews
There are no reviews yet