Mark4 HD 5inch DJI HD FPV Freestyle Frame Kit
* Framekit Only – Not incluiided DJI FPV Air Unit Cam
Features：
The perfect match DJI FPV Air Unit
3D printing parts are fixed and protected
No Propeller in the view
Full 3K Carbon Fiber Frame
Super lightweight Freestyle frame
Beautiful appearance design，durable in crashing
Quick maintenance Arms and replacement of equipment
25mm standoffs for better height and CG relation,Ample space for electronic installation
ALU6061 Srandoff New, Strengthen the hardness
There are 30.5*30.5mm and 20*20mm flight control holes, Stack can fit in the center or the rear.
High quality 3K twill carbon fiber plate, high precision CNC processing
YFS screw, 12.9 grade strength, non-slip teeth, anti-rust, Durable steel hardware
Specifications:
Item name：MARK4 HD5
Frame type：H-TYPE
Propeller: 5inch
Motor to motor：224mm
Size：138*176mm
Mounting Holes: 30.5*30.5mm/20*20mm
Weight：121g
Arms plate: 5mm
Side plate: 2.5mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Protect plate: 2mm
Recommended：
Flight Controller：RF/Kiss/F3/F4/F7
Engine: 22xx/23xx/24xx/25xx
ESC：30A-50A
Propeller：5inch
Lipo: 4S 1500mAh ~ 6S 1300mAh
FPV :DJI FPV Air Unit
Includes：
4 x 5mm 5inch Arms plate
2 x 2.5mm side plate
1 x 2.5mm top plate
1 x 2.5mm Bottom plate
2 x 2mm Bumper plates
2 x 2mm Reinforce plate
1 x Lipo silicone pad
1x DJI FPV Air Unit fixed
1x Antenna Mount
1x Rx Antenna Mount
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component follows market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you buy now, we ship within 24h from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What flight controller mounting options does the Mark4 HD 5inch frame offer and what is the recommendation for an initial setup?
A: The Mark4 HD 5inch frame offers two mounting hole patterns: 30.5×30.5mm and 20x20mm, making it compatible with a wide range of flight controllers. For an initial setup, we recommend using an RF, Kiss, F3, F4 or F7 flight controller, as they are widely compatible and offer good performance for FPV freestyle. The controller can be placed in the center or at the rear, depending on the pilot's preference and the desired weight distribution.
Q: The Mark4 HD 5inch frame is designed to be lightweight. What is the weight of the frame alone (without electronics) and what are the implications of this weight for the drone's performance?
A: The Mark4 HD 5inch frame weighs 121 grams. This light weight is crucial for FPV freestyle performance, as it allows greater agility, faster climb rates and a better response to the pilot's commands. A lighter frame also contributes to longer flight time, although this will also depend on other components such as the battery and motors.
Q: What motors and ESCs are compatible with the Mark4 HD 5inch frame and what range of LiPo batteries is recommended for optimal performance?
A: The Mark4 HD 5inch frame is compatible with 22xx, 23xx, 24xx and 25xx series motors. We recommend using ESCs (Electronic Speed Controllers) rated 30A to 50A to ensure adequate power delivery to the motors. For optimal performance, we recommend 4S LiPo batteries with a capacity of 1500mAh up to 6S with a capacity of 1300mAh. The choice of battery voltage will depend on flying style and desired power.
Reviews
There are no reviews yet