GOKU GM10 Pro V3 GPS w/compass

GOKU GM10 V3 GPS series is here!
Using the latest M10050 GNSS chip. Compared with the previous generation GM8 V2, the positioning is more accurate, and the speed of star search is faster.

Description
Brand: Flywoo
Model: GM10 PRO V3 GPS w/ Compass
Dimension :　25mm*25mm*6mm
Weight : 7.3g
Connector : 1.00mm spacing between the 6pins patch seat

Features:
GPS Module,Three Module Compass
With electronic compass IC QMC5883L
1.0mm spacing between the 6pins patch seat

Specification
Electrical Characteristics
Chipset : M10050(Tenth Generation Chip)
Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Default Protocol : GPS,Galileo,BeiDou
Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels : 72 Searching Channel

Sensitivity
Tracking : -162dBm
Reacquisition : -160dBm

Data and Update Rate
Support Rate : 4800bps to 921600bps,Default 115200bps
Data Level : TTL or RS-232,Default TTL level
Data Protocol : BF4.3.X(UBLOX)/BF4.2.X(NMEA)
Output frequency : 1Hz-10Hz，Default 10Hz

Operational Limits
Altitude : 50,000m Max
Velocity : 500m/s Max
Acceleration : Less than 4g

Power consumption
VCC : DC Voltage ：5V
Operating temp :　-40 °C ~ +85°C
Storage Temp : -40°C ~ +105°C

Indicator :
PPS LED:yellow .PPS LED not bright when GPS not fixed,flashing when fixed
The Module’s Pins: TX RX GND 5V SCL SDA

Includes
1x GM10 PRO V3 GPS w/ Compass
1x 150mm Cable
1x Copper Foil

Recommended by Influencers

Comparison

Preguntas Frecuentes (FAQ)

Q: Which Betaflight firmware versions is the GOKU GM10 Pro V3 GPS compatible with and what data protocol does it use?
A: The GOKU GM10 Pro V3 GPS is compatible with Betaflight versions 4.2.X and 4.3.X. It uses the UBLOX (BF4.3.X) and NMEA (BF4.2.X) protocols for data transmission. It is important to configure the protocol correctly in Betaflight to ensure GPS information is received properly.

Q: The GPS module has a 1.00mm connector. What should I keep in mind when connecting it to my FPV flight controller and what data levels does it support?
A: Because of the 1.00mm connector, you will need cables and connectors compatible with this pitch. An incorrect connection can damage the module or the controller. The module supports TTL and RS-232 data levels, with TTL being the default. Check your flight controller's settings to make sure they match the GM10 Pro V3's data level.

Q: What is the GOKU GM10 Pro V3's receiving sensitivity and what does it mean in terms of performance in environments with weak GPS signal?
A: The GOKU GM10 Pro V3 has a tracking sensitivity of -162dBm and a re-acquisition sensitivity of -160dBm. These values indicate the module can pick up and maintain a GPS signal even in relatively weak-signal conditions. However, in environments with significant obstructions (tall buildings, dense trees) or electromagnetic interference, performance can be affected and the time to obtain a GPS fix may increase.