Description
HGLRC 2812 LEDs with their own controller
This HGLRC 2812 LED kit includes a controller and four W554B RGB LED boards to light up your drone’s arms. The controller runs straight off the battery, 2S to 6S, with its own 5 V 2 A BEC, so it puts no load on the flight controller and needs no Betaflight setup.
A short press changes colour; holding for 3 seconds picks the mode: steady, fast flash, breathing or slow multicolour flash. The lights help you see the drone’s orientation at dusk and find it in the grass.
2812 LED controller specifications
- Input: 2S to 6S
- BEC: 5 V and 2 A
- Mounting: 20 × 20 mm holes for M3
- Size: 36 × 13 × 6 mm
- Controller weight: 1.7 g
Kit contents
- 1 2812 LED controller
- 4 W554B LED boards
- 3 × 30 AWG 100 mm wires: yellow, red and black
- Heat shrink: 1 × 60 × 10 mm and 4 × 50 × 8 mm
Frequently asked questions about the HGLRC 2812 LEDs
Does it connect to the flight controller?
No, it is powered from the battery and run with its own button, independent of the flight controller.
Where does it mount?
The controller goes on a 20 × 20 mm stack with M3 screws and the LED boards on the arms, held with the heat shrink.
Reviews
There are no reviews yet