Description
5-in-1 XT60H cable: one input, five connectors
This 5-in-1 XT60H cable has an XT60H female input and splits into five outputs with the most common RC connectors: T (Deans), XT30, XT60H and JST, all male, plus a DC female socket. With one cable you can connect gear that uses different connectors without making an adapter for each.
It is about 22 cm from the input to the ends and uses flexible, easy-to-route 14AWG silicone wire. The XT60H on the input and on the output have a grey housing over the solder joints.
Connectors on the 5-in-1 XT60H cable
- Input: XT60H female
- Output 1: T (Deans) male
- Output 2: XT30 male
- Output 3: XT60H male
- Output 4: JST male
- Output 5: DC female socket
- Wire: 14AWG silicone
- Length: about 22 cm
What it is for
It is handy in the flight bag: it powers gear with different connectors from one source, such as goggles or screens with a DC socket, receivers and small devices with JST or XT30, or older batteries and chargers with a T plug.
Before using it
All outputs share the same voltage that comes in through the XT60H input. Check that each device accepts that voltage before plugging it in, and use one output at a time unless you know your source can handle the draw of several.
5-in-1 XT60H cable FAQ
Is the input male or female?
Female: it is an XT60H with the two sockets. It plugs into a male XT60 or XT60H.
How long is it?
About 22 cm from the input connector to the output ends.
What gauge is the wire?
14AWG, in red and black silicone.
Reviews
There are no reviews yet