Description
5-in-1 banana cable: from the charger to five connectors
This 5-in-1 banana cable has two 4 mm banana plugs on the input, red and black, that go into the terminals of your charger or power supply. From there it splits into five connectors: T (Deans), XT30, XT60H and JST, all male, plus a DC female socket. With one cable you use the same charger with gear that has different connectors.
It uses flexible 14AWG silicone wire that is easy to route on the charging bench. The XT60H output has a grey housing over the solder joints.
Connectors on the 5-in-1 banana cable
- Input: two 4 mm bananas, red (+) and black (−)
- Output 1: T (Deans) male
- Output 2: XT30 male
- Output 3: XT60H male
- Output 4: JST male
- Output 5: DC female socket
- Wire: 14AWG silicone
What it is for
Handy on the charging bench: with your usual charger you connect batteries and gear with different connectors without swapping cables each time, from T or XT30 batteries to small devices with JST or a DC socket.
Before using it
Plug the red banana into the positive terminal and the black one into the negative. All outputs get whatever the charger delivers, so set it up for the device you are connecting and use one output at a time.
5-in-1 banana cable FAQ
What size are the bananas?
4 mm, the usual size on LiPo charger terminals.
Are the outputs the same as on the XT60H input version?
Yes: T, XT30, XT60H and JST males and a DC female socket. Only the input changes.
What gauge is the wire?
14AWG, in red and black silicone.
Reviews
There are no reviews yet