14AWG XT60 Male Plug to 4.0mm Banana Plug Silicone Cable Chargers
<a href="http://Dronefpvshop.com//wp-content/uploads/2021/10/XT60-Male-Female-Plug-to-4.0mm-Banana-Plug-dronefvpshop.ch_.jpg»>
Specification:
Name: Charging Silicone Cable
Cable Diameter: 14AWG Silicone Cable
Cable Length: 20cm
Plug: XT60 Male Plug to 4.0mm Banana Plug
Packaging Included:
1X Charging Cable
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component follows market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you buy now, we ship within 24h from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What is the maximum current this XT60 to 4.0mm banana charging cable can handle, considering the 14AWG gauge of the silicone wire?
A: The 14AWG silicone wire used in this cable can safely handle a continuous current of approximately 20-25 Amps. However, it is crucial to check the maximum current rating of your battery and charger so as not to exceed the limits and avoid damage or fire risk. Although the cable can handle that current, the weakest component in the system will determine the real limit.
Q: Is this cable suitable for charging LiPo batteries of different voltages (for example, 3S, 4S, 6S)? Are there any special considerations?
A: Yes, this cable is compatible with LiPo batteries of different voltages (3S, 4S, 6S) as long as your charger is compatible with that specific voltage. The cable itself is a conductor and is not limited by voltage. However, *always* check that your charger's output voltage matches the voltage of the battery you are charging. Using an incorrect voltage can damage the battery or the charger.
Q: Is this cable's 4.0mm banana connection compatible with most LiPo balance chargers? Is there any difference between banana connectors and does it matter?
A: The 4.0mm banana connection is a common standard for LiPo balance chargers. In general, it is compatible with most modern chargers. There are different banana connector sizes (2.0mm, 3.5mm, 4.0mm, 5.5mm), and it is important to use the right size to ensure a secure, efficient connection. This cable uses the 4.0mm size, which is the most common for FPV drone battery chargers. Make sure your charger's ports are also 4.0mm.
Reviews
There are no reviews yet