The frame is the skeleton. It sets the prop size and where you bolt the flight controller.
Uncommon class, halfway between 8" and 10". Estimated data: check before publishing.
Approximate prices · Guidance only; always check the manufacturer's spec sheet.
HelpLong range with a heavy payload. Uncommon class, halfway between 8" and 10". Estimated data: check before publishing.
| Props | 9" |
|---|---|
| Motors (stator) | 2810, 2814, 3110, 3115 |
| Recommended KV | 850–1100 KV on 6S |
| Battery cells | 6S |
| Battery capacity | 6S: 4000–9000 mAh |
| ESC (amps) | 60–80 A |
| Flight controller bolt pattern | 30.5x30.5 |
| Weight without battery | 550–800 g |
| Approximate cost | 600–1100 € |
| Build time | 9–13 h (beginner) · 4.5–7 h (experienced) |
The usual is 2810, 2814, 3110 or 3115 motors, with 850–1100 KV on 6S. A motor that's too small runs out of power and one that's too big adds weight.
It uses 6S. Typical capacities: 6S 4000–9000 mAh. The battery cells must match the motors and what the ESC supports.
The drone costs roughly between €600 and €1100. On top of that you need a radio, goggles and a charger if you don't have them.
A beginner takes about 9–13 hours; someone with experience, 4.5–7 hours.
Analog, DJI O4, Walksnail Avatar or HDZero will fit. Remember the goggles must use the same system as the camera.
Long range with a heavy payload. Uncommon class, halfway between 8" and 10". Estimated data: check before publishing.
