The frame is the skeleton. It sets the prop size and where you bolt the flight controller.
Very small frames: the space limits which VTX and camera fit. 3S is the most used pack in this class.
🛒 In our shop right now
Approximate prices · Guidance only; always check the manufacturer's spec sheet.
HelpLight freestyle, parks, no complicated registration. Very small frames: the space limits which VTX and camera fit. 3S is the most used pack in this class.
| Props | 2.5" |
|---|---|
| Motors (stator) | 1203, 1204, 1303, 1404 |
| Recommended KV | 7500–10000 KV on 2S · 6000–8000 KV on 3S · 4500–6000 KV on 4S |
| Battery cells | 2S, 3S, 4S |
| Battery capacity | 2S: 450–650 mAh · 3S: 450–650 mAh · 4S: 450–850 mAh |
| ESC (amps) | 12–25 A |
| Flight controller bolt pattern | AIO 16x16, AIO 20x20, 20x20 |
| Weight without battery | 55–180 g |
| Approximate cost | 110–230 € |
| Build time | 4–7 h (beginner) · 2–4 h (experienced) |
The usual is 1203, 1204, 1303 or 1404 motors, with 7500–10000 KV on 2S or 6000–8000 KV on 3S or 4500–6000 KV on 4S. A motor that's too small runs out of power and one that's too big adds weight.
It uses 2S or 3S or 4S. Typical capacities: 2S 450–650 mAh, 3S 450–650 mAh, 4S 450–850 mAh. The battery cells must match the motors and what the ESC supports.
The drone costs roughly between €110 and €230. On top of that you need a radio, goggles and a charger if you don't have them.
A beginner takes about 4–7 hours; someone with experience, 2–4 hours.
Analog, DJI O4 or Walksnail Avatar will fit. Remember the goggles must use the same system as the camera.
Light freestyle, parks, no complicated registration. Very small frames: the space limits which VTX and camera fit. 3S is the most used pack in this class.
