The frame is the skeleton. It sets the prop size and where you bolt the flight controller.
30.5x30.5 is the standard. 20x20 and 25.5x25.5 only on ultralight 5" builds. Freestyle 2300-2700 KV (4S) / 1700-2100 (6S); racing a bit higher.
🛒 In our shop right now
Approximate prices · Guidance only; always check the manufacturer's spec sheet.
HelpThe standard class: freestyle, racing, filming with a GoPro. 30.5x30.5 is the standard. 20x20 and 25.5x25.5 only on ultralight 5" builds. Freestyle 2300-2700 KV (4S) / 1700-2100 (6S); racing a bit higher.
| Props | 5" |
|---|---|
| Motors (stator) | 2205, 2206, 2207, 2208, 2306, 2308 |
| Recommended KV | 2300–3000 KV on 4S · 1700–2300 KV on 6S |
| Battery cells | 4S, 6S |
| Battery capacity | 4S: 1300–1500 mAh · 6S: 1000–1300 mAh |
| ESC (amps) | 40–65 A |
| Flight controller bolt pattern | 30.5x30.5, 25.5x25.5, 20x20 |
| Weight without battery | 150–450 g |
| Approximate cost | 260–700 € |
| Build time | 6–10 h (beginner) · 3–5 h (experienced) |
The usual is 2205, 2206, 2207, 2208, 2306 or 2308 motors, with 2300–3000 KV on 4S or 1700–2300 KV on 6S. A motor that's too small runs out of power and one that's too big adds weight.
It uses 4S or 6S. Typical capacities: 4S 1300–1500 mAh, 6S 1000–1300 mAh. The battery cells must match the motors and what the ESC supports.
The drone costs roughly between €260 and €700. On top of that you need a radio, goggles and a charger if you don't have them.
A beginner takes about 6–10 hours; someone with experience, 3–5 hours.
Analog, DJI O4, Walksnail Avatar or HDZero will fit. Remember the goggles must use the same system as the camera.
The standard class: freestyle, racing, filming with a GoPro. 30.5x30.5 is the standard. 20x20 and 25.5x25.5 only on ultralight 5" builds. Freestyle 2300-2700 KV (4S) / 1700-2100 (6S); racing a bit higher.
Complete builds ready to customise.
