Description
iFlight ProTek25 Pusher HD with Caddx Polar Vista
The ProTek25 Pusher is iFlight’s 2.5-inch cinewhoop with Caddx Polar Vista digital video. Its motors are inverted in a pusher layout, so the prop wash leaves without hitting the frame: more thrust, longer flights and less noise.
It weighs 143.8 g without battery. With a 4S 650mAh battery and a naked GoPro Hero8 it stays under 250 g. The PP body and carbon frame come apart by removing just 8 screws, so repairs are quick and cheap.
ProTek25 Pusher specifications
- Electronics: SucceX-D Whoop AIO F4 20 A
- Motors: XING 1404 4600 KV
- Video: Caddx Polar Vista
- Props: 2.5 inches
- Motor to motor: 108 mm
- Weight: 143.8 g without battery
- Recommended battery: 4S 650 or 850mAh
- Receiver: DJI PNP or TBS Crossfire Nano version
Flight time according to iFlight
- With naked GoPro: 3 to 5 min on 650mAh and 4 to 6 min on 850mAh
- Without GoPro: 5 to 7 min on 650mAh and 6 to 8 min on 850mAh
In the box
- ProTek25 Pusher drone, built and tested
- iFlight Sigma U.FL LHCP 5.8 GHz antenna
- 2 sets of iFlight Nazgul 2525 props
- 2 battery straps, 15 × 150 and 15 × 180 mm
Frequently asked questions about the ProTek25 Pusher
What else do I need to fly it?
DJI HD goggles compatible with the Vista, 4S batteries and, for the Crossfire version, a radio with a TBS module. The DJI PNP version is flown with the DJI controller.
Does it come set up?
Yes, iFlight ships it with basic PID and filter settings and Angle mode enabled for your first flights.
Reviews
There are no reviews yet