Description
Motor grip pliers for changing props
When you tighten a prop nut, the motor wants to spin and you end up holding it with your fingers next to the blades. These motor grip pliers lock the bell firmly, so you tighten or loosen the nut without the motor moving and without risk of cutting yourself.
They are metal, about 146 × 47 × 13 mm, and the jaws fit the bell of FPV drone motors. Together with an 8 mm wrench, swapping all four props at the field takes seconds.
Pliers specifications
- Material: metal
- Color: negro
- Size: about 146 × 47 × 13 mm
- Contents: 1 pair of motor grip pliers
How to use them
Wrap the jaws around the motor bell below the prop and squeeze the handle. With your other hand, turn the nut with the wrench. Do not squeeze harder than needed so you do not mark the bell.
Frequently asked questions about the motor grip pliers
Do they fit any motor?
For most 5-inch FPV drone motors and similar sizes.
Is a nut wrench included?
No, the 8 mm nut driver is sold separately.
Reviews
There are no reviews yet