Description
Male XT30 connector with 10 cm lead
This male XT30 connector comes with 10 cm of red and black lead already soldered on. It saves you the trickiest part, soldering the connector, and you only need to solder the wire ends where you need them.
The XT30 is the usual connector on micro drones, toothpicks and small 2S to 4S batteries. Use it for the battery lead of an ESC or AIO flight controller, to extend a battery lead or to make custom adapters.
XT30 connector specifications
- Type: male XT30
- Lead: 10 cm, red and black
- Use: micro drones, 2S batteries, ESCs and adapters
- Contents: 1 connector with wire
Soldering tips
Mind the polarity: red is positive and black is negative. Tin both ends well before joining them and cover the joint with heat shrink. Check on your own gear which side takes the male plug before cutting anything.
Frequently asked questions about the male XT30 connector
How much lead does it have?
10 cm of lead already soldered to the connector.
Is it suitable for 5-inch drones?
A 5-inch main battery uses XT60; the XT30 is meant for smaller gear.
Reviews
There are no reviews yet