Description
XT60 connector with 12 AWG silicone wire
This XT60 connector comes pre-soldered to 10 cm of red and black 12 AWG silicone wire. You can choose the male or female version. XT60 is the most used battery connector on 5-inch FPV drones and chargers.
Use it to replace a drone’s power lead when the plug breaks or burns, to build a new drone, or to make your own charge leads and adapters. Since it comes pre-soldered, you only need to join the other end.
12 AWG wire is the usual gauge for the power lead on 5-inch drones, so it handles in-flight current well. When soldering, tin both ends first, join them quickly so the insulation does not overheat, and cover the joint with heat shrink.
Connector specifications
- Connector: XT60H male or female, with a grey housing over the solder joints
- Wire: soft 12 AWG silicone
- Length: 10 cm
- Contents: 1 connector with wire
Frequently asked questions about the XT60 connector with wire
Male or female?
Look at the plug you are replacing or the one it has to mate with, and order the opposite one.
Does polarity matter?
Yes: red is positive and black negative. Always check before connecting a battery.
Reviews
There are no reviews yet