AIO IFlight for Whoop 20Amp
Size：30.5*30.5mm
Mounting pattern：25.5*25.5mm/φ3mm
Weight: 7.5g
MCU：STM32F411
Gyro：BMI270
Blackbox：8MB
BEC output: 5V 2A
Config：IFLIGHT_F411_PRO.config
INA pad：nR2
Barometer：No
Constant current：20A，25A（Burst）
Input：2-4S
Current sensor：yes
BLHeli：BLHeli-S
ESC Telemetry：no
Firmware Target：IFLIGHT_F411_PRO
ESC Firmware: Bluejay QH-50
SucceX-D Whoop V2 F4 AIO Board×1
Capacitor 470uF/16V × 1
XT30 18awg wire
Wire harness (plug&play) for DJI Air Unit × 1
M2 silicone grommets × 4
M2 damping balls x 4
M2*8mm Screws x 4
PRODUCT DESCRIPTION
FC // SucceX-D F4 AIO
Size：30.5*30.5mm
Mounting pattern：25.5*25.5mm/φ3mm
Weight: 6.7g
Connector：Micro-USB
MCU：STM32F411
Gyro：MPU6000
Blackbox：8MB
BEC output: 5V 2A
INA pad：nR2
Barometer：no
Constant current：20A，25A（Burst）
Input：2-4S
Current sensor：yes
BLHeli：BLHeli-S
ESC Telemetry：no
Firmware Target：IFLIGHT_F411_PRO
ESC Firmware：GH-30 BLS 16.7
Package Included:
– SucceX-D Whoop V1 F4 AIO Board× 1
– Capacitor 470uF/16V × 1
– XT30 18awg cable
– Wire harness (plug&play) for DJI Air Unit × 1
– M2 silicone grommets × 4
– M2 damping balls x 4
– M2*8mm Screws x 4
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component follows market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you buy now, we ship within 24h from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What is the difference between the SucceX-D Whoop V2 and V1 in terms of ESC firmware and what are the implications for performance?
A: The SucceX-D Whoop V2 uses Bluejay Q-H-50 ESC firmware, while the V1 uses G-H-30 BLS 16.7. Bluejay offers improvements in motor smoothness, throttle response and overall efficiency. In practice, this translates into more precise, controlled flying, especially in tricks and precision flying, and potentially longer battery life.
Q: What type of current and voltage sensors does this AIO support and how can I access this information to monitor battery consumption during flight?
A: This Iflight AIO includes an integrated current sensor. Although it does not have native ESC telemetry, the current sensor information can be accessed through Betaflight firmware by configuring the OSD (On-Screen Display) and connecting a telemetry-compatible receiver. This lets you view current consumption in real time during flight, helping you manage the battery and avoid excessive discharge.
Q: Is this AIO compatible with DJI Air Unit video systems and what type of connection is required? Do I need any additional components for the connection?
A: Yes, this AIO includes a wiring harness (plug&play) designed specifically for the DJI Air Unit. The connection is direct through this harness, simplifying installation. The package includes the necessary harness, so no additional components are required to connect the DJI Air Unit. Be sure to check voltage compatibility between the Air Unit and the AIO (2-4S).
Reviews
There are no reviews yet