Description
TBS high-density COB LED strip
This TBS COB LED strip is 4 mm wide and 1 m long with 480 LEDs per metre. Being so narrow, it sticks onto whoop ducts, quad arms, wings or even RC cars.
COB stands for chip on board: the LEDs sit very close together on the same board, so a COB LED strip gives a continuous line of light instead of separate dots. This is the 24 V version.
COB LED strip specifications
- Density: 480 LEDs per metre
- Voltage: 24 V
- Width: 4 mm
- Length: 1 m
- Cut points: every 50 mm
- Mounting: adhesive backing, no screws or clips
- Brand: TBS (Team BlackSheep)
How to cut and fit the COB LED strip
The 24 V version can be cut every 50 mm without damaging the rest of the strip. Always cut at the marks, clean and degrease the area and stick the strip onto a dry, flat surface.
Before soldering it, check that the output you plan to use on your drone supplies the voltage the strip needs. A 24 V strip will not light properly from a 5 V output.
Frequently asked questions about the COB LED strip
Which colours are available?
You can choose blue, green, purple or red in the selector on this page, subject to availability.
Does it need screws?
No. It has adhesive tape on the back; a clean, dry and flat surface is all it needs.
Reviews
There are no reviews yet