Description
Flywoo DJI O4 coaxial cable
This Flywoo DJI O4 coaxial cable connects the camera to the video module of the DJI O4 and O4 Pro. Use it as a spare when the stock cable is damaged in a crash, or to change the cable length in a new build.
It is thinner and more flexible than the stock cable and weighs 0.3 to 0.5 g less, which you notice on a micro drone. Being flexible, it can be routed through tight frames without stressing the connectors.
DJI O4 coaxial cable specifications
- Compatible with: DJI O4 and DJI O4 Pro
- Lengths: 100, 150 or 200 mm
- Weight saving: 0.3 to 0.5 g compared with the stock cable
- Brand: Flywoo
Which length to choose
Measure the route between the camera and the video module in your frame and add a little slack so the cable is not under tension. The 100 mm suits whoops and compact micro drones, the 150 mm most 2.5 to 3.5-inch builds, and the 200 mm larger frames or builds where the module sits far from the camera.
How to replace the coaxial cable
Unplug the battery, release the connector on the camera side and on the module side by pulling the plug, never the cable, and push the new one in until it clicks. Secure it to the frame so it cannot touch the props.
Frequently asked questions about the DJI O4 coaxial cable
Does it fit the O3 or the Avata?
No. It is made for the DJI O4 and O4 Pro; other units need their own cable.
Does it affect image quality?
When it is plugged in properly, the image is the same as with the stock cable. If you see dropouts or no image, check that both connectors are fully seated.
Reviews
There are no reviews yet