📋 Technical Specifications
| Conector | XT30 & |
| Input voltage | 1-6S (3 – 30V) |
| Trip current | 1.0A |
Avoid imminent disaster with the JHEMCU Smoke Stopper: a self-resetting / resettable fuse in line with your quad's power.
The first time you power your Drone is often called the "smoke test". If everything powers up correctly, you pass; if not, you'll be inhaling magic blue smoke and replacing parts! Not with the JHEMCU Smoke Stopper! Compared with standard smoke stoppers, the JHEMCU Smoke Stopper offers much lower trip and hold currents, as well as a faster reaction time. We also provide a wider range of input voltages and input and output connectors than any other smoke stopper!
Specifications
-
- Connector: XT30 & XT60 (input and output)
- Input voltage: 1-6S (3 – 30V)
- Trip current: 1.0A
- Hold current: 0.5A
- 1x JHEMCU Smoke Stopper
Disclaimer: This is simply a fuse. Something could still be damaged even after the fuse trips. It will not protect against every kind of damage, but it is still much better than nothing!
❓ Preguntas Frecuentes
Is this product compatible with my drone?
This component meets market standards. Check whether you use an analog or digital (HD) system and your battery voltage.
When will it arrive?
If you place your order now, we ship within 24 hours from our warehouse in Spain.
Preguntas Frecuentes (FAQ)
Q: What is the main difference between the Amass Smoke Stopper and a traditional fuse in terms of operation, and what advantages does it offer for an FPV drone?
A: Unlike a traditional fuse that burns out and must be replaced, the Amass Smoke Stopper is self-resetting or resettable. This means that after tripping due to an overcurrent (1.0A in this model), it resets automatically once the current returns to normal levels (0.5A hold). This avoids having to interrupt the session and replace the fuse, which is crucial in FPV environments where access can be limited.
Q: My drone uses a 4S (14.8V) battery and has XT60 connectors. Is this Amass Smoke Stopper directly compatible with my setup, or do I need adapters?
A: Yes, this model is directly compatible. The Amass Smoke Stopper specifies an input voltage range of 1-6S (3-30V), which includes 4S (14.8V). It also has XT30 and XT60 connectors, so you can connect the battery input (XT60) directly and the output to the rest of the drone's electronics (XT30 or XT60, depending on your needs).
Q: The Smoke Stopper is described as a 'fuse'. What types of drone faults does it specifically protect against, and which does it *not* protect against? Is it complete protection?
A: The Smoke Stopper mainly protects against overcurrents caused by short circuits or faults in electronic components that draw excessive current (above 1.0A). This can prevent major damage to the flight controller, ESCs or battery. However, it is *not* complete protection. It does not protect against mechanical failures, damage from incorrect voltage, or problems caused by software errors. The product description clearly states that 'something could still be damaged' even after the fuse trips, so it is an additional layer of protection, but not an absolute guarantee.
Reviews
There are no reviews yet