TBS CROSSFIRE DIVERSITY NANO RX – LONG-RANGE RECEIVER

Description

ATTENTION!

UPDATE YOUR CROSSFIRE TRANSMITTER TO V2.88 OR HIGHER BEFORE PAIRING!

Once again, TBS redefines long-range flying! With the TBS Crossfire Diversity Nano RX we have taken the most powerful Crossfire receiver. We present the smallest full-size diversity receiver of any frequency, even with a power redundancy circuit (battery not included)!

DIVERSIDAD REAL, ALCANCE COMPLETO

The TBS CROSSFIRE Diversity Nano receiver is a compact R/C receiver with 8-channel outputs (compatible with PPM, SBUS and CRSF), with the best noise rejection in the industry and record-breaking range capability. It is the only receiver that provides a true dual-input stage, chip-based diversity, with the usual filtering and noise rejection of onboard video systems.

MODO BEACON

Have you ever lost an aircraft and spent hours looking for it? Enter TBS CROSSFIRE beacon mode. The diversity nano receiver comes with a LiPo battery port where you can connect an optional backup port (1s). It will keep the receiver running for a whole day after all the onboard electronics have shut down. It will call for help by giving you its GPS coordinates, and will also emit RF beacon signals that will let you locate its position even if there was no GPS on your aircraft. The backup battery (1s) will also charge as soon as you apply power to the equipment.

ESPECIFICACIONES

• Peso: 1.8g (solo receptor)
• Size: 24mm x 18mm
• Requiere: Firmware V2.87
• Power input: +3.3V to 8.4V

INCLUYE

• 1x Receptor TBS Crossfire Diversity Nano
• 2x TBS Crossfire micro receiver antenna
• 1x Spare heat shrink tube
• 14x Cables 30awg silicone connection

DESCARGAS

• TBS Crossfire – RED Declaration of Conformity
• Quick start guide / Manual
• TBS Crossfire Nano Diversity RX FCC certification

Preguntas Frecuentes (FAQ)

Q: What firmware versions are needed on both the transmitter and the TBS Crossfire Diversity Nano RX receiver for correct pairing and to avoid operating problems?
A: It is crucial to update the TBS Crossfire transmitter to firmware version V2.88 or higher *before* attempting to pair it with the Diversity Nano RX receiver. The receiver requires firmware V2.87 or higher to work properly. Failing to meet these firmware requirements can result in pairing failures or unstable performance.

Q: The TBS Crossfire Diversity Nano RX offers multiple output protocols. What are they and what is the recommendation for use with a modern flight controller?
A: The receiver supports three output protocols: PPM, SBUS and CRSF. For modern flight controllers, using the CRSF (Crossfire Serial Protocol) protocol is strongly recommended. CRSF offers a higher update rate, bidirectional telemetry and greater reliability compared with PPM and SBUS, optimizing the system's performance and features.

Q: How does the TBS Crossfire Diversity Nano RX's 'Beacon Mode' work and what additional components are needed to take advantage of this functionality?
A: 'Beacon Mode' lets you locate a lost drone even after the main power has run out. It requires connecting a 1S LiPo battery to the designated port on the receiver. This backup battery powers the receiver for a day, transmitting GPS coordinates (if the drone has GPS) and RF signals to make locating it easier. The 1S battery charges automatically when the drone is powered by the main battery.