LiteRadio 3 Pro Radio Transmitter Betafpv 2022

CHF 99.00

LiteRadio 3 Pro Radio Transmitter Betafpv 2022 CHF 99.00
1 items left in stock!

 

Thank you for support a small business!

Guaranteed Website with Safe Checkout

Description

LiteRadio 3 Pro Radio Transmitter Betafpv 2022

ExpressLRS 2.4G

LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system. It comes with the hall gimbals, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. The OLED display screen on the top of the transmitter brings visually instant data and a controlling interface to users. What’s more, two optional internal RF systems and alternative external nano TX module make it a multi-protocol transmitter.

Note: Currently, the ELRS 2.4G version is on pre-order and will be dispatched in 7-15 days after placing the order due to lack of chip and raw material. However, the CC2500 version is available and will be shipped in 24 hours after purchase.

FB d9e96bdb c031 4782 8240

LiteRadio Collections

Literadio 3 Pro radio transmitter is greatly enhanced its internal ELRS module output power up to 250mW, which enables LiteRadio 3 Pro to excellently adapt its controlling range. Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Besides, the OLED display screen and operating system are newly added to it for better usability.

LiteRadio 3 ProLiteRadio 3LiteRadio 2 SE
Gimbal SensorHallPotentiometer (Hall replaceable)
RF Output Power50mW, 100mW, 250mW (ELRS)
100mW (CC2500)
≤100mW≤100mW
RF SystemCC2500 / SX1281CC2500 / SX1280CC2500 / SX1280
Battery2000mAh 1S2000mAh 1S1000mAh 1S
External TX Module ProtocolMULTI, CRSF, PPM, XJT, DSM2, R9M, etcCRSFNot support
Display Screen1.3-inchNot supportNot support
Operating SystemEdgeTXLiteRadio System

Note: When setting the ELRS version power to 500 mW, there might be a danger of packet loss at high temperatures. Please be careful using it.

FB bc81a59f 0003 4d4c 8e8f

Bullet Point

  • LiteRadio 3 Pro is a new milestone for LiteRadio Series so far. It is an open-source radio transmitter with the EdgeTX system. Therefore, you can try your best to customize it with the EdgeTx system.
  • Hall gimbal features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel.
  • Built-in 2000mAh 1S battery, LiteRadio 3 Pro can work up to 15 hours without an external module, bringing an excellent endurance performance.
  • A 1.3-inch OLED display screen is newly installed. Controlled by two 5D buttons and settings are easy to be adjusted directly from the display screen.
  • Internal ELRS TX module up to 250mW output power enables LiteRadio 3 Pro to excellently adapt its controlling range.
  • Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Highly recommend BETAFPV ELRS Nano TX Module and other brands of nano TX modules are also available.

Specification

  • Item: LiteRadio 3 Pro Radio Transmitter
  • Channel: 8 Channels
  • Gimbal: Hall Sensor
  • Frequency Range: 2.4G
  • RF System: SX1280 / CC2500
  • Antenna: Internal Antenna
  • RF Output Power: 50mW, 100mW, 250mW (ELRS 2.4G) / 100mW (CC2500)
  • Screen: 1.3 inch OLED display screen
  • Protocol Option: ExpressLRS 2.4G / CC2500 (Frsky D, Frsky X, SFHSS)
  • Battery: Built-in 2000mAh 1S Battery
  • Operating system: EdgeTX
  • Port: Type-C USB 3.0 port / 3.5mm Audio port
  • USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G)
  • Recommend External TX Module: ELRS Nano TX Module
  • Recommend Accessories: Nano Gimbal for LiteRadio 3 ProStorage CaseTransmitter Neck Strap
FB 05b1bf77 6061 4de9 a531

EdgeTX Official Supported

LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system, which is an open-source firmware for RC radio transmitters. The firmware is highly configurable and brings much more features than traditional radios. Therefore, you can try your best to customize LiteRadio 3 Pro such as language, voice and etc with the EdgeTX system.

FB 1 3be6d8f2 a61e 4a3a 861a

Note: Please click here to know more about EdgeTX operating system.

OLED Display Screen

OLED display screen with two 5D buttons is newly added to LiteRadio 3 Pro radio transmitter. Users can adjust the TX settings such as switching internal/external modules, gimbal calibration and binding on the screen by controlling 5D buttons. Compared with LiteRadio 3, it is easier to adjust such settings and very friendly to a new player.

FB 81a38bbd 6d8c 4474 8089

EdgeTX Passthrough for ELRS Upgrade

With EdgeTX operating system, flashing ExpressLRS internal TX modules is easier for everyone. First, there is no need to disassemble the case. Compared with upgrading by WIFI, it is more convenient, fast, and stable to flash ELRS internal TX firmware by using EdgeTX passthrough flashing.

Note: Please click here to know the upgrading steps. The passthrough is only used for ELRS 2.4G version. Currently, BETAFPV is actively communicating with the ExpressLRS official team on the latest ExpressLRS configurator to support flashing LiteRadio 3 Pro ELRS TX firmware.

FB Pathrough 17866122 0723 45fd 8449

External TX Module

Nano module bay enables the external TX module available. LiteRadio 3 Pro reaches a high level with its capability to support multi-brand external TX modules in the market for different protocols such as MULTI, CRSF, PPM, XJT, DSM2, and R9M, etc. BETAFPV ELRS Nano TX Module, which features a high refresh rate, ultra-low latency, and long-range, is strongly recommended for LiteRadio 3 Pro.

Note: If you are ready to install the TBS external nano module, the TBS nano module case size should be 64*42*25mm, the thicker one of the retrofit cases.

FB 1 ff7503c2 3349 4ed1 9df0

Hall Gimbal

Features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. With an adjustable stick end, it perfectly fits thumbs and greatly improves the stick feel for the control. Hall Effect provides contactless sensing for not only accurate control inputs and precise centering but also durable use.

FB 5272c092 b319 43d9 9586

Diagram of LiteRadio 3 Pro

Top view

Front view

x 1991e08f 5167 4de5 8916

Back view

c ab9e7833 da42 4fdd b0c2

Below is the diagram of LiteRadio 3 Pro.

  • Power button: Long press to turn on/off
  • Bootloader Button: Turn off the radio transmitter. Press the Bootloader button and Power button simultaneously. Releasing the two buttons at the same time will enter the Bootloader interface.
  • Black Toggle Switches: Toggle to activate the trimming function of the remote control joystick.
  • Left 5-D Button: Toggle the button up/down/left/right to trim the joystick. Press the button to exit/return.
  • Right 5-D Button: Toggle the button up/down/left/right to select and move. Press the button to confirm/enter.

Switching Protocol and Binding

Radio transmitter settings and binding for ELRS 2.4G version are shown below. Please turn on Internal and External RF protocol at the same time when using the internal ELRS TX module. (With ExperssLRS 2.4G sticker on the Nano module bay.)

  • Set External RF mode on OFF.
  • Turn on Internal RF and select CRSF mode.
1 767fdadc 82f1 400a 9a60
2 c58122a4 0664 4a13 94e5
  • Binding: Enter the ExpressLRS.lua interface, and select Bind to complete linking.
logo 381c8ba7 eb73 4041 84b5

Radio transmitter settings and binding for CC2500 version are shown below. (With CC2500 sticker on the Nano module bay.)

  • Turn off External RF
  • Turn on Internal RF and select the corresponding protocol under MULTI mode.
cc25002 2a7f04d1 299d 4662 8780
  • Binding: Select Bind to complete linking on the interface.

Radio transmitter settings are shown below when installing and using the external TX module.

  • Turn off Internal RF.
  • Turn on External RF.
  • Select the correct protocol type based on the external TX module.
  • Binding: Please refer to the corresponding manual according to the external TX module.

Gimbal Calibration

  • Enter calibration mode
1 027b7d05 3eac 46b2 8e31
2 948bc9ce 8e81 4b22 ae4b
  • Complete the calibration with prompts
3 ea922689 bb58 4893 a8f6
4 eca5561a 84e2 4f99 8b81

Note: Please do not move the joysticks too hard during the calibration process, otherwise, calibration accuracy will be affected. Please move the joysticks slightly during the calibration process.

  • Exit calibration mode
5 16c11a9b 3035 49ed 8da2

Firmware Upgrade

WiFi upgrading for ELRS is shown below.

  • Enter ELRSV2.lua interface
  • Select WiFi Connectivity
  • Connect WiFi via computer or mobile phone
  • WiFi Name: ExpressLRS TX
  • WiFi PWD: expresslrs
  • Upgrade firmware on ExpressLRS official site

EdgeTX Passthrough flashing for ELRS.

Note: BETAFPV is actively communicating with the ExpressLRS official team on the latest ExpressLRS configurator to support flashing LiteRadio 3 Pro ELRS TX firmware.

Recommended Parts

We highly recommend buying LiteRadio 3 Pro Radio Transmitter with the parts listed below.

FAQ

Download the manual for LiteRadio 3 Pro radio transmitter.

Package

  • 1 * LiteRadio 3 Pro Radio Transmitter
  • 1 * User Manual
  • 2 * Joystick Protective Covers
36911c0904db1d481a24384dac5a57ea 977db83d f302 41cf aa7f 94f8a6189968 1024x1024

Additional information

Brand: No selection

Betafpv

Version: No selection

4-in-1, ERLS

Reviews

There are no reviews yet.

Be the first to review “LiteRadio 3 Pro Radio Transmitter Betafpv 2022”

Your email address will not be published.