iFlight Blitz Stack F7 V1.1 55A 4in1 ESC

 82.00 87.00

 82.00

Sin existencias

 87.00

Sin existencias

 

GRACIAS por apoyar un pequeño negocio!

Sitio web garantizado con pago seguro

iFlight Blitz Stack F7 V1.1 55A 4in1 ESC
 82.00 87.00
Contact Us!

iFlight Blitz Stack F7 V1.1 55A 4in1 ESC

BLITZ F7 45A Stack 6
iFlight Blitz Stack F7 V1.1 55A 4in1 ESC 2

PRODUCT DESCRIPTION

FC // BLITZ F7 V1,1 Flight Controller

Top Features:

Features

Improved circuit design, better components and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

With LC filter

FC Specifications

MCU: STM32 F722

Gyro: BMI270

Barometer: DPS310

OSD Chip: AT7456E

Flash: 32MB (Blackbox flash)

UARTS: 6

Motor outputs: 4x (SH1.0 connector)

I2C serial: SDA / SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target: IFRC-IFLIGHT_BLITZ_F722

Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

Dimensions: 36.5*35 mm

Weight: 7.8g

BEC:  5V 2.5A / 9V 2A

Wiring Suggestion

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemetry

ESC Specifications

Mounting Holes: 30.5*30.5mm/Φ4mm

Weight: 15.3g

Supports 2-6S lipo input

MCU:G071

Constant: 55 Amps 

Burst: 65 Amps

Current sensor: Yes

BEC: No

Current rate: 200

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Target:   IFLIGHT_BLITZ_G2

Packing List

1 x BLITZ F7 V1.1 Flight Controller

1 x BLITZ E55S 4-IN-1 2-6S ESC

1 x silicon grommets

1 x wire harness for F7 Flight controller

– Improved circuit design, better components and lower electrical noise!

– DJI HD VTX Connector (Plug-and-Play / No soldering required)

– FC indicator LEDs for visual debugging

– With LC filter

Specifications:

  • MCU: STM32 F722
  • Gyro: BMI270
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • Flash: 32MB (Blackbox flash)
  • UARTS: 6
  • Motor outputs: 4x (SH1.0 connector)
  • I2C serial: SDA / SLA pads
  • Smartaudio / IRC Tramp VTX protocol supported
  • LED controller: Yes
  • Beeper pad: Yes
  • Firmware target: IFRC-IFLIGHT_BLITZ_F722
  • Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
  • Dimensions: 36.5*35 mm
  • Weight: 7.8g

Wiring suggestion:

– UART 1 for VTX HD / Analog

– UART 2 for a Receiver

– UART 3/4/5 for GPS or other sensors that require a serial port

– UART 6 for ESC Telemetry

Tips

  1. F722 MCU has an inner inverter.
  2. SBUS、CRSF、ELRS、IBUS、DSM ETC… can be connected to any unused UART_RX,we suggest you connect to Uart_RX2
  3. Frsky SmartPort,Tramp & Smartaudio can be connected to any unused UART_TX,we suggest you connect to Uart_TX1
  4. F.port can be connected to any unused UART_TX,we suggest you connect to Uart_TX2

ESC // BLITZ E45 4-IN-1 2-6S 45A ESC

Specification:

– Supports: DShot150/300/600/MultiShot/ OneShot etc.

– Mounting Holes: 30.5*30.5mm/Φ4mm

– Supports 2-6S lipo input

– Telemetry Output: NO

– Target: QH-40 16.7

– Current sensor: Yes

– Constant: 45 Amps 

– Current rate: 200

– Burst: 55 Amps

– Weight: 14.7g

– MCU: BB21

– BEC: NO

PACKAGE INCLUDED:


– 1PC X BLITZ F7 V1.1 FLIGHT CONTROLLER

– 1PC X BLITZ E45S 4-IN-1 45A 2-6S ESC

– 1SET X SILICON GROMMETS

– 1SET X WIRE HARNESS FOR F7 FLIGHT CONTROLLER

Información adicional

Peso 0.5 kg
Marca

iFlight

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “iFlight Blitz Stack F7 V1.1 55A 4in1 ESC”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *