Freestyle Frame Kit Analog – HD 5inch Assassin
Assassin 222mm 222 5inch Pure Carbon Fiber FPV Freestyle Frame with 5mm Arm support 5140 5.1inch Prop for FPV Racing Drone
1. The installation size of FPV lens is 19*19. There are 30.5*30.5 and 20*20 mounting holes in the middle section, and 30.5*30.5 mounting holes are also provided in the second half section. There are more directions in choosing flight control. The 30.5*30.5 in the middle section has been equipped with soft-installed silicone, which can reduce the pressure on the flight control to a greater extent, so as to achieve smooth flight.
The internal height of 2.30mm, can easily install the three-story flying tower, with the 30.5*30.5 mounting holes in the second half, it can easily install other equipment such as card recorder.
3. The plate nut is pressed into the left and right integrated arms of 5MM, while the simple design can improve the strength of the arms. It is convenient to install and disassemble, reduce the virtual position of the aircraft, increase the frame strength, and make the flight more stable.
4. The arms and upper and lower plates of the rack are chamfered. The plan of using countersunk screws on the upper plate makes the loading surface more level.
5. High-quality 3K twill full carbon fiber, high-precision CNC processing.
6. There are also 3D printed parts exclusive to the frame, which are beautiful and effectively improve the protection of low-speed impacts, allowing players to provide protection while flying and reduce losses. Of course, there are customized thickened aluminum columns to ensure the strength of the rack!
7. The new special-shaped structure, no matter FPV or recording, the screen will not appear paddle clean! Maximum support 5.1 inch paddle
Frame wheelbase: 222mm
Rack maximum support blade: 5.1 inches
Empty weight: 137g (with prints)
Floor thickness: 3mm
Upper plate thickness: 2.5mm
Arm thickness: 5mm
Arm width: 10mm
Internal height: 30mm
Flight control hole distance: 30.5*30.5 M3 20*20 M2
Motor card hole position: 8mm
Motor mounting hole pitch: 16*16mm 22/23 series motor
Note: Only a frame kit , the Motor , ESC, Camera, Flihght controller and other Electronic Accessories are not Included.
1set x Assassin 222mm 222 5inch Frame
1pcs x battery strap
2pairs x 5045 propeller (send as your choice