TWIG XL – 3″ FPV Toothpick Quad

This TWIG XL X version frame is definitely the most popular frame at present.

This product is currently out of stock and unavailable.


Thank you for support a small business!

Guaranteed Website with Safe Checkout

TWIG XL 3” FPV Toothpick Quad-The first joint quad with Racer X FPV, but not the last one.

This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design is out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motors12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S battery and provides you a super efficient flight experience. What is more, we adopt the injection molded canopy, protecting your camera well even in a several severe crashing.

3 959c1b9e 1ff2 472a 9df3


8b465053d72bf33c227fa9eedfc2486b 24d78f25 6d60 4cda bfbf

Flight Controller

Toothpick F4 2-4S 12A AIO FC– Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience

HX115 HD1fc jpg 9ebec34a 23a5 4352 863d

Camera & VTX

The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18″ HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

Snipaste 2020 01 10 17 52

TWIG Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” props. The frames accommodate motor mounting for 4-hole 9×9 or 12×12 motor mounts.


Canopy for Mini Camera V3 version– MINI V3 canopy has a holder hole in the front, but not on MINI V2 canopy. It is suitable for all mini cameras which are the 19*19mm or 20*20mm FPV cameras, like Caddx Vista or DJI FPV unit cameraCaddx Turtle V2RunCam Racer 3.


  • 1 * TWIG XL 3” FPV Quad
  • 1 * HQ 3016 3-Blade Props (4pcs)
  • 1 * Set of M2*7 screws

*Battery is NOT included. 

Additional information

Weight0.6 kg
Dimensions10 × 15 × 10 cm
Receiver option: No selection

PNP, TBS Crossfire NANO RX


There are no reviews yet.

Be the first to review “TWIG XL – 3″ FPV Toothpick Quad”

Your email address will not be published.